• PET Series
  • User-friendly Design
  • Unit Introduction
  • Function List
  • Technical Data

PET Series

FUHRUNG Series

1.Special designed screw and barrel for BMC & fiber material, anticorrosive and wear-resisting, charging and plasticization pressure stable and accurate, working life long, ensure making the smooth surface, high precision and high strength products. 2.Large volume auto charging unit, high efficiency, easy to clean and operation safe. 3.Mold heat insulation plate, mold temperature control exactly; Special mold heat interface, easy to connect with mold. 4Special barrel cooling system, ensure plasticized material low viscosity, high flow, and the high quality products. 5.Optimized barrel structure is easy to clean and maintenance, the easy broken parts are convenient to change. 6.Charging and speed proportional control, ensure the convenient adjustment and stable movement. 7.Strengthened injection structure, high rigidity, stable injection, reliable movement and long working life. 8.Barrel temperature visible control, operation easy and convenient, temperature controlled accurately.9.Barrel temperature protection device, effectively to prevent plasticized material solidification during charging temperature increasing.

Application Scope

Anticorrosive and wear-resisting products, such as car lamp, car lampshade, car bumper and stereo audio amplifier, etc

User-friendly Design

Unit Introduction

  • Clamping Unit
  • Injection Unit
  • Hydraulic Unit
  • Electric Unit

1.Larger space between tie-bars, suitable for larger molds and multi-cavity necessary.

2.Longer and wider guide length, higher repeatability precision, improve product quality and mold working-life.

3.Upgraded parts, Graphite-copper bushes and slider used on tie-bar, ejector and movable platen, ensure fast and precise mold close and open.

4.Better designed mechanical structure and toggle system, faster cycle time, and improve production efficiency.

5.European type ejector structure, larger space, convenient for maintenance.

6.Prepared enough space for upgrade and retrofits.

7.Built-in and adjustment free mechanical safety bar, more safe and convenient.

8.Much higher rigidity mechanical system than normal Chinese IMM, not only improve machine’s using-life, but also can protect mold.

1.Single injection cylinder, can avoid the double cylinder’s pressure difference, injection more stable and precise.

2.Double linear guide rail, low friction, faster speed, more precise and stable.

3.Double carriage cylinder, avoid injection unit moving left and right, perfect for fast and precise injection.

4.Full supported injection unit, avoid injection unit moving up and down,

5. Injection proportional back-pressure control, convenient for operation, and data more stable.

6.All of screw L:D = 20:1, prepared the installation place for different size screws, more convenient.

7.To compare with normal IMM, injection speed improved higher than 30%. mold cavity easy to full filled,product internal stress will be lower and quality will be more stable.

8.The key parts, like injection cylinder, spline etc, our suppliers are same as world high level IMM manufacturers, reliable quality.

1.Environmental protection:Machine working quietly, low energy consumption; European famous brand hydraulic pipe, Germany DIN standard hydraulic pipe fitting with seal, G screw thread style plug, avoid oil pollution.

2.Stability:Cooperate with European famous brands hydraulic suppliers, precise control force, speed and direction of hydraulic system, ensure machine’s precision, durability and stability.

3.Convenient: Visible and dischargeable oil tank, easy for hydraulic circuit maintenance, self-seal suction filter, reasonable placed hydraulic pipe fittings, maintenance will be easy and convenient.

4.Future-proofing : Modular designed hydraulic system, no matter function upgrade, or retrofit

5.hydraulic system, our prepared installation position and space will make it so easy.

KEBA Hardware advantages:

1.Stable and reliable hardware: Adopt world first-class hardware and production testing technology, ensure its stable and reliable quality. 10 short circuit protection function, more safety for using;All of product passed CE certificate, stable hardware performance reduced your maintenance and service cost.

2.Precise measurement and control: High precision analog input(14 bit), output (12 bit), excellent interference immunity, ensure the precision and stability of measurement and control; Analog output support voltage and current output way. and able to direct drive PQ valve and other external equipment, avoid the amplify converter's tolerance, and can save cost.

3.Fast response: Strong 400MHz, 32 bit CPU, 128MB SDRAM, high speed task cycle time 2ms: High performance CPU with logic task distribution system, ensure high efficient and high precise movement control, and smooth menu changing.

KEBA software advantages:

1.Excellent control software: KePlast controlling software is very advanced and excellent, ensure machine movement stable and precise, we support the functions like: machine automatic adjustment, mold data automatic memory (easyMold), and optimized temp PID control functions etc.

2.User-friendly menu design : New designed user-friendly operation menu, it will make you feel "machine operation is so easy”

Other Electric Parts Advantages:

Safe and reliable: All electric parts are from the world first-class suppliers, strong and weak current were separated distributed.

Function List

  • Injection Unit
  • Glamping Unit
  • Hydraulic Unit
  • Electric Unit
  • Others
  • Function List
  • 60-160
  • 220-280
  • 350-450
Injection Unit      
Standard B screw
Other size screw
Bimetallic screw and barrel
Stainless steel screw
Chroming screw
Hardness screw
Needle valve nozzle (SVN)
Hydraulic / Pneumatic shut off nozzle
Single cylinder injection structure
Double balance carriage cylinder
Double linear guide rail
Full supported injection unit
Up-grade / Down-grade injection unit
High torque hydraulic motor
Electrical pre-plasticizing
Injection transducer control
Nozzle transducer
Screw rotation speed display
Feed zone temp automatic control
Normal heat bands
Ceramic heat bands
Electromagnetic heater
Auto purge function
Cold start protection function
Nozzle cover
Proportional backpressure
Accumulator fast injection
Servo valve
Glamping Unit      
T-slotmold platen
Magnet platen
Extend mold height
Graphite-copper movable platen slider
Graphite-copper tie-bar bushes
Graphite-copper ejector bushes
Mechanical & electric interlock device
Mold open & close and ejector transducer control
Product dropdown chute with sensor
Good / bad parts selector
Mold height adjustment limited switch
Mold height auto-adjustment function
Clamping force indication
Clamping force with close loop & indication
Widened safety door
Automatic safety door
Mould Hanger
Quantitative automatic centralized lubrication
Fixed platen water regulation
Fast connector water regulation
Glass water regulator
Hydraulic / Electric rotation demould
Air blast
Core pull
Hydraulic unscrew device
Unscrewing counter sensor
Proportional valve for mold open & close
Simultaneous movement (use single pump)
Hydraulic shut off control for hot runner nozzle
Heat insulating plate
Hydraulic Unit      
Servo motor system
Variable pump
Fixed pump
DFEE pump
Increase pump motor capacity
Increase cooler capacity
Hydraulic safety interlock
Oil temperature indication
Oil temperature regulation
Oil level alarm
Hydraulic oil pre-heating
Oil tank magnet
By-pass filter
High pressure in-line filter
Low pressure return oil filter
External filter interface
Self-seal magnetic suction filter
Electric Unit      
KEBA controller
Real time working condition monitor
Monitoring for production data
Fault alarm
Hardware input/output monitoring
Euromap 12 robot interface
Euromap 67 robot interface
Three color tower lighter with alarm
Electric motor overload protection
Emergency stop for safety door
SSR
Power socket 3P+2 (16A)
Power socket 3P+2 (32A)
Single phase power socket (10A)
Euromap power socket 3P+2 (16A)
Euromap power socket 3P+2 (32A)
Single phase Euromap power socket (10A)
Hot runner control and interface
Leadway network management system
Others      
CE safety full closed machine cover
Full covered aluminium checkered plate
Leveling pads, Manual
Tool box, Easy broken parts
Mold clamp
Steel hopper
Stainless steel hopper
Hopper dryer
Hopper magnet
Special color (Pantone No. necessary)
Higher machine base
Robot
Chiller
Mold temperature controller
Dehumidifier
Auto-loader
Fumigated wooden case
Plateform for ready products

 

Remarks: “●” for standard, "○*' for option, "▬” for Not available

Technical Data

  • LWF900

    LWF900

    Description LWF900
    International size rating 310
    Injection Unit  A B C
    Screw diameter mm 30 35 40
    Screw L:D ratio L/D 20 20 20
    Shot volume cm³ 106 168 220
    Shot weight g 96 153 200
    oz 3.7 5.9 7.8
    Injection pressure Bar 2420 1877 1437
    Injection rate c㎡/s 95 130 169
    Plasticizing capacity g/s 11 13 16
    Injection stroke mm 150 175 175
    Max. screw speed r/min 307
    Clamping Unit 
    Clamping force kN 900
    Opening stroke mm 330
    Mold platen dimensions mm 600x550
    Space between tie bars <H x VI mm 420x370
    Max. mold height mm 380
    Min. mold height mm 150
    Min. mold dimensions mm 270x240
    Ejector stroke mm 100
    Ejector force kN 45
    Number of ejector pcs 5
    Power Unit 
    Pump motor power kW 11
    Heating capacity kW 5.9 6.9 8.7
    Number of temp zones 4
    Others 
    Dry-cycle time s 1
    Oil tank capacity L 180
    Machine dimensions(L×W×H) m 4.5x1.32x1.75
    Machine weight t 4.2
    Hopper capacity kg 25

    The shot weight is based on polystyene at specific gravity of 1.05

    Due to continuous improvements, we reserve the right to amend any aspect of the above specifications without notice.

     

     

  • LWF1300

    LWF1300

    Description LWF1300
    International size rating 460
    Injection Unit A B C
    Screw diameter mm 35 40 45
    Screw L:D ratio L/D 20 20 20
    Shot volume cm³ 164 251 318
    Shot weight g 149 229 289
    oz 5.8 8.9 11.2
    Injection pressure Bar 2423 1855 1466
    Injection rate c㎡/s 125 164 207
    Plasticizing capacity g/s 13 18 20
    Injection stroke mm 170 200 200
    Max. screw speed r/min 320
    Clamping Unit 
    Clamping force kN 1300
    Opening stroke mm 380
    Mold platen dimensions mm 675x625
    Space between tie bars <H x VI mm 470x420
    Max. mold height mm 450
    Min. mold height mm 150
    Min. mold dimensions mm 305x270
    Ejector stroke mm 120
    Ejector force kN 45
    Number of ejector pcs 5
    Power Unit 
    Pump motor power kW 15
    Heating capacity kW 6.9
    Number of temp zones 4
    Others 
    Dry-cycle time s 1.6
    Oil tank capacity L 200
    Machine dimensions(L×W×H) m 4.9x1.4x1.85
    Machine weight t 5.3
    Hopper capacity kg 25

    The shot weight is based on polystyene at specific gravity of 1.05

    Due to continuous improvements, we reserve the right to amend any aspect of the above specifications without notice.

     

     

  • LWF1600

    LWF1600

    Description LWF1600
    International size rating 650
    Injection Unit A B C
    Screw diameter mm 40 45 50
    Screw L:D ratio L/D 20 20 20
    Shot volume cm³ 251 358 442
    Shot weight g 229 326 402
    oz 8.9 12.6 15.6
    Injection pressure Bar 2328 1839 1490
    Injection rate c㎡/s 163 207 255
    Plasticizing capacity g/s 18 22 26
    Injection stroke mm 200 225 225
    Max. screw speed r/min 300
    Clamping Unit 
    Clamping force kN 1600
    Opening stroke mm 445
    Mold platen dimensions mm 760x710
    Space between tie bars <H x VI mm 520x470
    Max. mold height mm 520
    Min. mold height mm 180
    Min. mold dimensions mm 335x305
    Ejector stroke mm 140
    Ejector force kN 59
    Number of ejector pcs 5
    Power Unit 
    Pump motor power kW 18.5
    Heating capacity kW 8.7 10.7 12.9
    Number of temp zones 4
    Others 
    Dry-cycle time s 2
    Oil tank capacity L 300
    Machine dimensions(L×W×H) m 5.3x1.5x1.87
    Machine weight t 6.2
    Hopper capacity kg 25

    The shot weight is based on polystyene at specific gravity of 1.05

    Due to continuous improvements, we reserve the right to amend any aspect of the above specifications without notice.

     

     

  • LWF2200

    LWF2200

    Description LWF2200
    International size rating 950
    Injection Unit A B C
    Screw diameter mm 45 50 60
    Screw L:D ratio L/D 20 20 20
    Shot volume cm³ 358 491 707
    Shot weight g 326 447 643
    oz 12.6 17.3 24 9
    Injection pressure Bar 2402 1946 1351
    Injection rate c㎡/s 198 244 352
    Plasticizing capacity g/s 22 28 33
    Injection stroke mm 225 250 250
    Max. screw speed r/min 214
    Clamping Unit 
    Clamping force kN 2200
    Opening stroke mm 490
    Mold platen dimensions mm 840x790
    Space between tie bars <H x VI mm 570x520
    Max. mold height mm 550
    Min. mold height mm 200
    Min. mold dimensions mm 370x335
    Ejector stroke mm 150
    Ejector force kN 73
    Number of ejector pcs 9
    Power Unit 
    Pump motor power kW 22
    Heating capacity kW 10.7 12.9 190
    Number of temp zones 5
    Others 
    Dry-cycle time s 2.5
    Oil tank capacity L 400
    Machine dimensions(L×W×H) m 5.6x1.75x1.97
    Machine weight t 7.5
    Hopper capacity kg 50

    The shot weight is based on polystyene at specific gravity of 1.05

    Due to continuous improvements, we reserve the right to amend any aspect of the above specifications without notice.

     

     

  • LWF2800

    LWF2800

    Description LWF2800
    International size rating 1600
    Injection Unit A B C
    Screw diameter mm 50 60 70
    Screw L:D ratio L/D 20 20 20
    Shot volume cm³ 491 848 1155
    Shot weight g 447 772 1051
    oz 17 30 41
    Injection pressure Bar 2744 1905 1400
    Injection rate c㎡/s 219 316 430
    Plasticizing capacity g/s 28 37 44
    Injection stroke mm 250 300 300
    Max. screw speed r/min 190
    Clamping Unit 
    Clamping force kN 2800
    Opening stroke mm 600
    Mold platen dimensions mm 960x960

    Space between tie bars(H x V)

    mm 630x630
    Max. mold height mm 630
    Min. mold height mm 280
    Min. mold dimensions mm 400x400
    Ejector stroke mm 180
    Ejector force kN 73
    Number of ejector pcs 13
    Power Unit 
    Pump motor power kW 30
    Heating capacity kW 12.9 19 24.9
    Number of temp zones 5
    Others 
    Dry-cycle time s 2.8
    Oil tank capacity L 500
    Machine dimensions(L×W×H) m 6.43x1.9x2.1
    Machine weight t 12
    Hopper capacity kg 50

    The shot weight is based on polystyene at specific gravity of 1.05

    Due to continuous improvements, we reserve the right to amend any aspect of the above specifications without notice.

     

     

  • LWF3500

    LWF3500

    Description LWF3500
    International size rating 2500
    Injection Unit A B C
    Screw diameter mm 60 70 80
    Screw L:D ratio L/D 20 20 20
    Shot volume cm³ 848 1347 1759
    Shot weight g 772 1226 1601
    oz 30 48 62
    Injection pressure Bar 2420 1877 1437
    Injection rate c㎡/s 310 422 551
    Plasticizing capacity g/s 37 48 57
    Injection stroke mm 300 350 350
    Max. screw speed r/min 179
    Clamping Unit 
    Clamping force kN 3500
    Opening stroke mm 680
    Mold platen dimensions mm 1060x1060
    Space between tie bars <H x VI mm 720x720
    Max. mold height mm 700
    Min. mold height mm 330
    Min. mold dimensions mm 420X420
    Ejector stroke mm 180
    Ejector force kN 73
    Number of ejector pcs 13
    Power Unit 
    Pump motor power kW 37
    Heating capacity kW 19 24.9 33.2
    Number of temp zones 5
    Others 
    Dry-cycle time s 3.1
    Oil tank capacity L 600
    Machine dimensions(L×W×H) m 7.6×2.0×2.15
    Machine weight t 15.2
    Hopper capacity kg 50

    The shot weight is based on polystyene at specific gravity of 1.05

    Due to continuous improvements, we reserve the right to amend any aspect of the above specifications without notice.

     

     

  • LWF4500

    LWF4500

    Description LWF4500
    International size rating 3400
    Injection Unit A B C
    Screw diameter mm 70 80 90
    Screw L:D ratio L/D 20 20 20
    Shot volume cm³ 1347 2011 2545
    Shot weight g 1226 1830 2316
    oz 47.5 709 898
    Injection pressure Bar 2233 1710 1351
    Injection rate c㎡/s 312 407 516
    Plasticizing capacity g/s 48 62 72
    Injection stroke mm 350 400 400
    Max. screw speed r/min 150
    Clamping Unit 
    Clamping force kN 4500
    Opening stroke mm 800
    Mold platen dimensions mm 1220x1220
    Space between tie bars (H x V) mm 820x820
    Max. mold height mm 760
    Min. mold height mm 360
    Min. mold dimensions mm 450X450
    Ejector stroke mm 215
    Ejector force kN 95
    Number of ejector pcs 13
    Power Unit 
    Pump motor power kW 45
    Heating capacity kW 19 24.9 33.2
    Number of temp zones 5
    Others
    Dry-cycle time s 3.4
    Oil tank capacity L 800
    Machine dimensions(L×W×H) m 8.1X2.2X2.2
    Machine weight t 19.5
    Hopper capacity kg 50

    The shot weight is based on polystyene at specific gravity of 1.05

    Due to continuous improvements, we reserve the right to amend any aspect of the above specifications without notice.